Line Magnetic LM845 Premium
lieferbar auf Anfrage - bitte kontaktieren Sie uns!
The LM-845 Premium is the result of many years of research on the 845 triode Single ended design. Thanks to its exceptional design and manufacturing quality, it is fast fast becoming the absolute reference in the high end amplifiers world.
With a power output of 2x30W, it can be use with most of the existing reference speakers.
The LM-845 Premium is a combination of two units: One is the amplifier unit and the other is output unit.
The LM-845 Premium uses Shuguang 300B tubes in drivers, the 310A for amplifier and Shuguang 12AX7 in pre-amplification.
There are two user bias controls for 300B and 845 have been used for bias adjustment and two meters has been added to the front plate to allow you to monitor bias with ease. Negative feedback switch is on the front plate that you can choose betweeen two levels of NFB to enjoy the different sound outputs.
The LM-845 Premium uses 8 transformers (power supply, filtering, coupling and output)!
- Single-ended design
- Class A amplifier
- Point-to-point wiring
- High quality components
Input stage: 2x 12AX7
Drivers: 2x 300B, 2x 310A
Power stage: 2x 845 « single-ended »
Hand-made construction with the finest point-to-point wiring
Bias control is accessible on top of the amplifier panel with true ampere meter.
SoftStart and time-delay circuit. (30 seconds)
Specially designed EI transformer for power supply
Two EI output transformers with wide bandwidth are applied
ALPS volume control and Realcap capacitors are applied.
Metal and removable tube guard cage
Infrared Remote control
- Class A amplifier - 2x30W RMS
- THD: 1% (1kHz)
- Signal/Noise ratio: 87dB (Pondéré A)
- Frequency Response (-1.5dB): 10 - 50.000 Hz
- Sensitivity: 220 mV (Built-in Mode)
- Input Impedance: 100kΩ
- Load impedance for HP to connect: 4/8/16Ω
- 3x Line inputs RCA (pair)
- 1x Pré-in input
- 2x Screw terminals compatible with banana plugs
- 2x Fuses
- 1x Remote control
- 1x Detachable power cord
- 1x Dedicated cable used to interconnect main amplifier unit to output unit
- 1x Manual
- Dimensions (W x H x D): Amplifier unit: 435 x 460 x 456 mm
- Dimensions (W x H x D): Output unit: 435 x 160 x 456 mm
- Total dimensions: 435 x 620 x 456 mm
- Total Weight: 62 Kg
The company LINE MAGNETIC was founded in 2005 by two brothers, both audiophiles who are passionate about tube electronics and notably the legendary American achievements of the 1950s. For many years, the company has become known throughout the world as the specialist in the repair and production of Western Electric, Altec, Jensen and other replicas of loudspeakers and electronics. Today, all drawings and designs are the result of a team of engineers audiophiles and experienced. The company has two factories in which all the products are made up of assemblies point-to-point wiring.
Know-how and pleasure of the senses
For many years, the company has become known throughout the world as the specialist in repairing and then replicating Western Electic loudspeakers and electronics.
Today Line Magnetic has its own line of products whose lineage with many products of legend is obvious.
Enjoy natural and performing sound
The Line Magnetic range is made up of amplifiers, sources and speakers, whose lineage with many legendary products is evident. Besides these productions, Line Magnetic also offers a whole range of components, loudspeakers, tube feeders, etc ... which are the delight of passionate audiophiles all over the world.
For many years, Line Magnetic has been known worldwide as a specialist in the repair and production of Western Electric, Altec, Jensen and other audio and speaker replicas. In addition to these productions, Line Magnetic also offers a whole range of components, speakers, tubes power supplies, etc ... which are the delight of passionate audiophiles around the world.