+++ 3 % Skonto bei Vorkasse +++ Ab 99 € Artikelwert keine Retourkosten innerhalb Deutschlands +++

Vertere Phono-1 MKII L - Phono-Vorverstärker

1.748,00 € *

inkl. MwSt. - Infos zu Versandkosten und Bedingungen

Lieferzeit: 10 - 14 Werktage

Farbe:

  • JH-27988.1
Fragen zum Artikel?
Vertere Phono-1 MKII L MM/MC The new MC | MM Preamplifier PHONO-1 MkII L gets the best from... mehr
Produktinformationen "Vertere Phono-1 MKII L - Phono-Vorverstärker"

Vertere Phono-1 MKII L MM/MC

The new MC | MM Preamplifier PHONO-1 MkII L gets the best from any high-quality record player, with maximum dynamic range and supreme detail resolution. With more than 10 gain settings, 15 resistance and 9 capacitance settings, PHONO-1 MkII L leaves nothing to chance. It makes the perfect match for almost any Moving Coil or Moving Magnet cartridge.

Why MC | MM Preamplifier PHONO-1 MkII L?

  • Realise the potential of any high-quality record player
  • Superb dynamics and detail with extremely accurate RIAA linearisation
  • Perfect level and load matching for Moving Coil and Moving Magnet cartridges
  • Brings continuous enjoyment when playing records, without exception

Gold Plated PCB Assembly

New ‘L’ shaped high-quality gold plated PCBs for the main phono circuit and the mains power transformer ensure optimised grounding and power distribution. Stainless steel shield ensures that any unwanted interference is kept well away from the audio signal.

Combined with the use of high-quality components and special solder, guarantee consistent optimum performance for the long term.

Double Shielded Main Circuit

Vertere’s PHONO-1 MM | MC Preamplifier utilises stainless steel shields to further enhance isolation of the RIAA and preamplifier circuits. All power supply components and circuits are outside of the main cover shield and away from any signal path.

Switchable Input Loading

PHONO-1 MkII L has two switch banks, now easily accessible from the underside of the unit, that allow 15 resistance and 9 capacitance settings for left and right channels.

Perfect load matching is crucial to maximising performance, for both Moving Coil and Moving Magnet cartridges – and in this respect PHONO-1 leaves nothing to chance.

Switchable Gain Setting

Another switch bank, also easily accessible from the underside of the unit, offers no less than 10 gain settings to provide the best level matching, within the gain range provided.

This ensures minimal level change between different sources used in the system.

Chassis Ground and PCB Earth Switch

A 3-way switch provided at the back of PHONO-1 gives the options of ‘Hard Ground’, ‘Ground Lift’ or ‘Soft Ground’ connection of the preamplifier and the chassis, to minimise any hum that may be introduced between the PHONO-1 and the main amplifier.

PHONO-1 Finishes

The PHONO-1 is available in a range of high-end finishes, including a new DG-1 design featuring a front panel to match the new Vertere record player (pictured). Finishes also available: Silver aluminium, Signature Vertere Orange and Semi-matt Black.

Technology

Phono stage design is rather challenging, as the circuit has to work with the minuscule cartridge signal that is typically only a fraction of a millivolt. That tiny signal has to be cleanly amplified a thousand-fold and equalised to the exact RIAA curve in order to faithfully represent the original recorded music.

Vertere’s PHONO-1 is designed to achieve just this, providing the full enjoyment that is so often missing even in very high-quality vinyl playback systems.

PHONO-1 has more than 10 gain settings to match the level perfectly for almost any cartridge. An extensive choice of 15 resistance and 9 capacitance settings ensure correct frequency balance even for most Moving Coils that commonly exhibit a frequency response lift above 10kHz.

Compact foot print of the main circuit and the use of highest quality components, maximise dynamic range and deliver supreme detail resolution. Utilising only tight tolerance components for PHONO-1’s accurate IRAA circuit ensures a refined, natural timbre that brings the music to life.

Our use of the best components guarantees optimal performance from the double-shielded internal circuits, while a 3-way phono PCB Ground Management switch allows achieving lowest ‘earth hum’ in almost any installation.

This level of attention to detail, performance and design execution is only found in much higher price products.

Vertere PHONO-1 redefines the standard for entry level High-End phono stages.

 Specifications

  • Type
    • MC/MM Preamplifier
    • Main Phono Circuit on Separate Gold Plated PCB  
  • Power Supply
    • Linear,  Int. Switchable
    • Transformer on Separate Gold Plated PCB
  • Gain Settings
    • 40.2dB to 62.8dB
    • In 10 Steps – See Manual
    • High Gain version - Add 6.4dB to all settings
  • Input Impedance Settings Resistance
    • 47k for MM
    • 78R to 47K for MC - in 15 Steps - See Manual
  • Capacitance
    • 100pF & 470pF for MM
    • 100pF to 1.02uF for MC – In 9 Steps – See Manual
  • Frequency Response 20Hz – 20kHz +/- 0.2dB
  • Noise < -78dB – AWD
  • THD-N 0.03%
  • Finish Front Panel Options Vertere Orange, Silver, Black, DG-1 Gloss Black
  • Dimensions W x D x H (Incl. Switches & Feet) 210 x 235 x 55mm
  • Weight 2.00Kg
Folgende Infos zum Hersteller sind verfübar...... mehr
Vertere

Vertere

When aiming to reproduce the complexities of music, it’s all too easy to introduce even greater complication in the engineering of audio equipment, putting in place one element to solve the problems of another until the whole design escalates into something fiendishly intricate – and expensive!

That’s not the Vertere way: coming at the whole problem with decades of audio and mechanical engineering experience, plus close collaboration with the recording and mastering industry, we step back, take a long hard look at the fundamentals, and look for simple, elegant solutions.

That may sound like a simple ‘less is more’ philosophy, but we prefer to look at it this way: the best audio equipment shouldn’t add anything to the original recording. Rather it should affect it as little as possible; bringing the listener ever closer to what the artist, producer and mastering engineer wanted you to hear.

 

Hinweis zu Aktualisierungen Ihrer Vertere-Produkte:

Auf dieser Webseite finden Sie den Geräte-Support, immer aktuelle Downloads und weitere Informationen zu Vertere-Produkten:

 

https://www.vertereacoustics.com/manuals-and-downloads

SPL Audio Phonos SPL Audio Phonos
1.699,15 € * 1.999,00 € *
Cayin CS-6PH - Röhren Phono Vorstufe Cayin CS-6PH - Röhren Phono Vorstufe
2.546,00 € * 2.680,00 € *
Violectric PPA V790 - Phono-Vorverstärker Violectric PPA V790 - Phono-Vorverstärker
3.710,70 € * 3.990,00 € *
Lehmannaudio Decade Lehmannaudio Decade
ab 1.699,00 € *
Rega Fono MM MK5 - Kundenrückläufer Rega Fono MM MK5 - Kundenrückläufer
269,00 € * 319,00 € *
Symphonic Line RG2 MK5 - Phono-Vorverstärker Symphonic Line RG2 MK5 - Phono-Vorverstärker
ab 3.960,00 € * 4.400,00 € *
PS Audio Stellar Phono - Phono Vorstufe PS Audio Stellar Phono - Phono Vorstufe
3.167,12 € * 3.599,00 € *
Transrotor Phono 8.2 MC Transrotor Phono 8.2 MC sym
3.617,70 € * 3.890,00 € *
Zuletzt angesehen
detail -