+++ 3% Skonto bei Vorkasse +++ Ab 50,- € Artikelwert keine Retourkosten innerhalb Deutschlands! +++

Taga HTA-2500B - Hybrid Verstärker

2.998,99 € *

inkl. MwSt. - Infos zu Versandkosten und Bedingungen

Lieferzeit: 2 - 4 Wochen

  • JH-24608
Fragen zum Artikel?
Taga HTA-2500B HTA-2500B dual-mono 2 x 200W design utilizes 2 high-performance 12AX7-T PSVANE... mehr
Produktinformationen "Taga HTA-2500B - Hybrid Verstärker"

Taga HTA-2500B

HTA-2500B dual-mono 2 x 200W design utilizes 2 high-performance 12AX7-T PSVANE Treasure Mark II vacuum tubes in the preamp section serving as a buffer amplifier and 6 pairs of high-power Sanken transistors (2SC4468/2SA1695) in the output. 

The HTA-2500B combines the best of both worlds -  soft and analog-like sound character provided by tubes and adding to that high dynamics and power of transistors.

2 toroidal transformers with total output of 1200W (600W per channel) provide large amounts of clean power, high voltage stability and very low AC ripple current. This reflects in higher dynamics and extra pure energy and greater abilities to properly drive very demanding and powerful speakers.

Audiophile grade ELNA capacitors (2 x 80V/10000uF for each channel) ensure stable playback improving music tone and sound field depth.
Audiophile grade Japanese ALPS volume potentiometer provides minimal noises and channels crosstalk and has excellent operational feel and limits errors between the two channels.

Oversized aluminum heat sink system (independent heat sink for each channel) helps to disperse internal heat and allows for long term high power playback with limited distortions.

The high-end class, gold-plated speaker terminals offer almost lossless audio signal transmission to speakers.
Analog inputs with high-end solid machined brass RCA sockets can accommodate up to 2 stereo devices.

You can connect a range of  digital devices via optical and coaxial inputs and a built-in high-resolution 24bit / 192kHz DAC (based on Wolfson WM8805 and Cirrus Logic CS4344 circuits) will always provide the best sound performance.

The HTA-2500B is also an ideal companion for mobile devices – stream music from smartphones, tablets or computers compatible with Bluetooth®.

For those who prefer discrete listening we equipped the HTA-2500B with a high-end headphone preamplifier.

A preamplifier output is dedicated for an optional external power amplifier or powered subwoofer and speakers.

The HTA-2500B offers additional options for easy upgrading the sound quality: 

  • Removable IEC power cable gives you an option to upgrade your system with a premium audiophile power cable in any time;
  • The tubes are installed in high-quality ceramic sockets and they can be very easily exchanged for new tubes of your choice.

The HTA-2500B is a splendid mixture of analog tube sound, power, precision, purity and multidimensional soundstage imaging!

 

Hybrid amplifier

What does it mean and why does TAGA Harmony use this approach?
Hybrid means a combination of two different techniques to create an amplifier in one device: the World of tubes and the World of transistors.
TAGA Harmony amplifiers use vacuum tubes in the preamp section and transistors in the power stage. This results in tube, soft and analog-like sound character and at the same time high dynamics and power provided by transistors, which is usually a weak point of pure tube designs.
The sound of TAGA Harmony hybrid amplifiers is not only silky and rich but also powerful and dynamic. In addition, hybrid amplifiers compared to pure tube amps have better abilities to properly drive different kind of speakers.

After being turned on a hybrid amplifier requires to warm up its tubes to reach its full sound capabilities – it usually takes from 5 to 15 minutes depending on model and room temperature.

Specifications

  • Design
    • Hybrid amplifier
    • Class A/B
    • Dual Mono
  • Vacuum tubes 2 x 12AX7-T PSVANE Treasure Mark II
  • Power output / impedance
    • 2 x 200W 8ohm
    • 2 x 400W 4ohm
  • DA converter
    • 24bit / 192 kHz
    • Wolfson WM8805
    • Cirrus Logic CS4344
  • Wireless connectivity Bluetooth® v4.0
  • Digital inputs Optical, Coaxial
  • Analog inputs CD, Line
  • Analog outputs RCA Pre-Out
  • Headphone output
    • Impedance: 32-300ohm  
    • Output power:350mW, 300ohm 
  • Frequency response 20Hz - 35kHz (±0.5dB)
  • Total Harmonic Distortions ≤0.15% (1kHz 1W)
  • Signal/Noise ratio 92dB
  • Features / accessories
    • Dimmer - tube window backlight
    • Mode: Direct, Loudness
    • Bass / Treble regulation
    • Aluminum remote controller
    • Antenna Bluetooth®
    • Removable IEC power cord
  • AC power / power consumption 230-240V 50Hz, 1200W (max)
  • Dimensions (H x W x D) 14 x 43 x 44 cm
  • Weight 21 kg / pc.

 

 

Folgende Infos zum Hersteller sind verfübar...... mehr
Taga
The European founders of the TAGA Harmony brand Mr. Kokocinski (currently the CEO and the European Sales Director) from Poland and Mr. Richard from Germany started their involvement in the audio business in the early years of 1990. They were recognized music lovers and specialists in the high-end audio and were dealing with repair and sales of high-end audio equipment. They found out that most speaker brands that boasted top sound performance, offered their products at extremely high prices, but they did not really provide good sound quality. This prompted them to establish their own TAGA Harmony brand. At the beginning the company was operating in the field of sound engineering services and audio products enhancement. It took almost 2 years to develop first loudspeaker prototypes which met enthusiastic reception of audiophiles. Nowadays TAGA Harmony brand is offering high quality products for the hi-fi and audio-video market. Main types of products are: high-end, hi-fi and home theatre speakers, in-wall/in-ceiling and outdoor speakers, multimedia speakers, hi-fi electronics and accessories for speakers. ---- The meaning of TAGA logo is To Achieve Glorious Acoustics and it says everything about the people behind the brand, their passion, devotion, philosophy and constant striving to perfection. It is TAGA Harmony’s DNA. It means that everything what TAGA Harmony designs, engineers or builds has one goal in mind: to provide the best sound and joy to music lovers around the World. A strong basis for the logo was added: “HARMONY” to emphasize that on every step all products are created in harmony with nature.
AMC CVT 3100 MK2 AMC CVT 3100 MK2
ab 1.850,00 € *
Cayin CS-55A KT88 Cayin CS-55A KT88
ab 2.298,00 € *
Cyrus ONE HD Cyrus ONE HD Kundenrückläufer
999,00 € * 1.295,00 € *
Taga HTR-1000CD Taga HTR-1000CD
499,00 € *
Cayin CS-100A EL34 Cayin CS-100A EL34
3.980,00 € *
Zuletzt angesehen